- Is 3.42 or 3.73 better?
- Is 3.55 or 3.73 gears better?
- Does higher gear ratio mean faster?
- What’s the best gear ratio for 35 inch tires?
- Are 3.73 or 4.10 gears better?
- Why does gear ratio affect towing capacity?
- How fast can you go with 4.10 gears?
- What is a max tow package?
- Is 3.23 a good gear ratio?
- Are 3.73 gears good for towing?
- Can I tow with a 3.23 gear ratio?
- What gear ratio is best for fuel economy?
- What gear ratio is best for speed?
- Is a 3.42 gear ratio good?
- Are 3.08 gears good for towing?
- Are 4.10 gears good for highway?
- What gear ratio is better for towing?
- How much can a 5.3 L v8 tow?
Is 3.42 or 3.73 better?
The difference in towing mpg between the 3.42 and 3.73 gears at highway cruise speed, under the same conditions, should be less than 1 mpg because of the slightly higher rpm running 3.73s.
Vehicle speed actually plays a bigger role in fuel economy than engine rpm..
Is 3.55 or 3.73 gears better?
3.55 will give you a little better gas mileage on the highway and slightly more highway oriented performance. 3.73 may be better for towing, lower end power (off the line acceleration), and may result in worse gas mileage on the highway.
Does higher gear ratio mean faster?
A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.
What’s the best gear ratio for 35 inch tires?
Depending on the axle, the next lowest ratio from a 4.10:1 is most likely the 4.56:1, which should be selected for towing and performance. Because of the extra weight associated with off-road tires, we usually recommend going with a performance-minded gear ratio for any tire size above 35 inches.
Are 3.73 or 4.10 gears better?
Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed. So, by changing your gear ratio, no power levels are being changed, just the torque….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOBetter gas mileageWorse gas mileageHigher top speedLower top speed2 more rows•May 12, 2020
Why does gear ratio affect towing capacity?
The key to understanding gear ratios is to remember that, as the numerical ratio goes up, towing capacity increases but fuel economy goes down. … So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.
How fast can you go with 4.10 gears?
With 4.10s…. With stock size tires you can go 150 mph at 5393 rpm in 5th gear. Check out the rpm calculator in the tech section.
What is a max tow package?
The Max Tow Package This improved towing package includes all the mechanical and electronic features found in the starting towing package, from the engine oil cooler and upgraded stabilizer bar to Pro Trailer Backup Assist and Smart Trailer Tow Connector.
Is 3.23 a good gear ratio?
The engineers likely chose the numerically low gear ratio for fuel economy reasons. … A later swap to a four-speed and 3.23 rear gears woke up the performance of the car considerably. Yes, highway rpm increased as well, but I rationalized it by deciding that 3.23 gears provided a good balance of performance and economy.
Are 3.73 gears good for towing?
FACT: A 3.73 axle ratio is ideal for towing heavy loads on flat terrain and will produce increased fuel economy during steady-state, long-distance highway driving.
Can I tow with a 3.23 gear ratio?
The Chevy Silverado four-wheel drive crew-cab truck features a standard 3.23 axle gearing. A 9,600-pound tow rating results, which is impressive for the equipped standard axle ratio.
What gear ratio is best for fuel economy?
The lower the number, the better fuel economy, and the higher the number the more towing power you have, but fuel economy suffers. For instance, a 3:31 gets better fuel economy than a 3:73. On the other hand, a 3:73 or perhaps a 4:10 will tow much more, while fuel economy greatly drops.
What gear ratio is best for speed?
If you prefer top speed to dragstrip performance, then higher axle gears, like 2.76:1 or 3.08:1, may be called for. The higher gears will reduce engine rpm versus road speed. Another way to look at it is that the car will go faster at the engine’s rpm limit than it would with lower gears.
Is a 3.42 gear ratio good?
Lower numeric axle ratios may help reduce how much an engine has to work while cruising at highway speeds, and can potentially help improve fuel economy. … For instance, the 3.42:1 ratio included on many Canyon V-6 and Sierra 1500 models offers a good all-around blend.
Are 3.08 gears good for towing?
Yes, you are exactly right, towing with a 6 speed with 3.08s is still better than towing with a 4 speed and 3.73s. If its a heavy trailer, you will probably never use 5th and 6th gears, but who cares? crank turns to rotate the rear wheels once that counts.
Are 4.10 gears good for highway?
Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. … Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once.
What gear ratio is better for towing?
A 3.73 ratio is suitable for regular light towing. If you plan on towing a fifth-wheel trailer or anything heavier than 5,000 pounds, you should consider a 4.1 axle ratio. A 4.1 ratio allows a towing vehicle to start moving without as much throttle.
How much can a 5.3 L v8 tow?
Its towing capacity is 7,900 pounds. 5.3L V8 Engine: With this available engine, the Chevy Silverado 1500 achieves 355 hp and 383 lb-ft of torque. Towing capacity is elevated to 11,600 pounds. 6.2L V8 Engine: Equipped with this engine, the Chevy Silverado 1500 can tow its maximum of 13,400 pounds (on the RST trim).